www.leadingoe.com
Notice:

Laser Wavelength Meter/ Laser Power Meter
  CO2 Laser Wavelength Meter
The CO2 Spectrum Analyzer is a unique grating spectroscope which simultaneously displays all the lasing transactions of a CO2 laser. It is calibrated both in wavelength and rotational line designation to permit easy identification of 140 possible laser transitions between 9.1 and 11.3 µ. These transitions are visually displayed through the use of a UV excited thermal sensitive screen which darkens in the area struck by the IR laser beam.
 
  Mechanical Power Meter
These probes are calibrated at 8-11µ as well, but have a lower damage threshold for this range than the C type probes. Calibration for any wavelength between 250nm – 2500nm is available upon request with an NIST certificate.
 
  Conical Laser Power Meter
Conical Head Power Probes are used to measure high power density CO2 laser beams which may damage the standard flat surfaced Power Probes. The conical absorbing cavity exhibits a high heat dissipation.
 
  Digital Laser Power Meter
Eight different Probe Heads are available for use with the DM5 Digital Meter. The Probe Heads have four different power ranges (designated D1, D2, D3, D4). The Probe Heads are also available with two absorbing coatings designated Y and C.